Yohunter789

1. Avrdude: Stk500_recv(): Programmer Is Not Responding Nano
2. Avrdude: Stk500_recv(): Programmer Is Not Responding Error

Avrdude: stk500recv: programmer is not responding avrdude: stk500getsync attempt 1 of 10: not in sync: resp=0x00. Avrdude: stk500recv: programmer is not responding problem with Meggy Jr. You should definitely try and get to the point of having that working, so. 今天玩arduino数码管时上传报错：avrdude: stk500recv: programmer is not responding 原因： 我的TX和RX引脚即数字0，1接着数码管，而arduino上传进行数据交互时会用到这两个引脚 解决： 每次上传代码时，都要拔下0，1引脚的线。上传完成后再接回去。.

Sketch uses 928 bytes (2%) of program storage space. Maximum is 32,256 bytes.
Global variables use 9 bytes (0%) of dynamic memory, leaving 2,039 bytes for local variables. Maximum is 2,048 bytes.
C:Program Files (x86)Arduinohardwaretoolsavr/bin/avrdude -CC:Program Files (x86)Arduinohardwaretoolsavr/etc/avrdude.conf -v -patmega328p -carduino -PCOM8 -b115200 -D -Uflash:w:C:UsersabinAppDataLocalTempbuild6019b9665d7767adebbe2ffad6f83d6c.tmp/led_blink.ino.hex:i
An error occurred while uploading the sketch

Board: Arduino/Genuino Uno
Port: COM8 (Arduino/Genuino Uno)
Programmer: AVRISPmkll
Arduino: 1.6.10 (Windows 8.1)

error.txt (15.8 KB)

Avrdude: Stk500_recv(): Programmer Is Not Responding Nano

Avrdude: Stk500_recv(): Programmer Is Not Responding Error

I'm trying to upload a program for the first time to my Due purchase here. I have IDE 1.6.9, set board to due, com port matches, cable in programmer port, drivers installed, tried different cables etc. I have work get every thing setup correctly and running on W7. The error I get is: avrdude: stk500_recv(): programmer is not responding. I tried hitting reset at different time intervals on upload. No luck. The led on the board flashes so I believe the blink program was installed from the factory. The programmer has defaulted to ARVISP mkII. Any thoughts on what to try next? Thanks